Lift Capacity up to 300 kg
One modular system, two product types: The vacuum tube lifters Jumbo Ergo and Jumbo Sprint share a common technical basis but differ in terms of their operator handles.
Jumbo ErgoFor workpieces of many different shapes and sizes
The twist grip on the Jumbo Ergo is designed to operate like a motorcycle throttle. Large and heavy loads such as wooden boards, cardboard boxes and solar panels can be moved gently and precisely. The length of the operator handle can be varied, which allows the user to always maintain a safe distance from the load.
Jumbo SprintFor compact workpieces
The Jumbo Sprint is equipped with a bow-shaped operator handle which extends all the way around the unit. This allows the user to optimally position it on compact goods such as bags or rubber bails. The load is raised by pulling up on the handle lever and lowered by pushing down.
Versatility is key Schmalz offers the correct vacuum grippers for virtually any application. With the quick-change adapter the gripper can be changed quickly and easily.
Single vacuum gripper
For compact goods such as cardboard boxes, barrels, buckets, jugs and cabinets.
Single vacuum gripper, long
For pallets, narrow cardboard boxes, beams, square tubes and other elongated workpieces.
Round vacuum gripper
For barrels, buckets or stone slabs with rough surfaces.
For paper and plastic bags, raw rubber bails and shrink wrapped packages.
Double vacuum gripper
For cardboard boxes, crates or sheets. The vacuum grippers can be continuously adjusted along the beam.
Double vacuum gripper FM
For pallets, sections or cut pieces where the vacuum gripper is not fully covered by the workpiece. The grippers can be continuously adjusted along the beam.
Quadruple vacuum gripper
For large cardboard boxes, sheets and non-rigid pieces. The vacuum grippers can be continuously adjusted lengthwise and crossways.
Multiple vacuum gripper
For uneven workpieces such as foil trays or unstable cardboard boxes. The individual vacuum grippers optimally compensate for any unevenness.
Schmalz offers mechanical gripper solutions for workpieces that cannot be vacuum-gripped, such as bags or open transport boxes.
Blowers SBM, SBL, SBV
Electric vacuum generators for workpieces weighing up to 300 kg. The frequency-controlled blower SBV is continuously variable and its power can be adjusted to changing loads.
Some more benefits of the Jumbo Ergo and Sprint Tube Lifters
Save up to 40% in energy with the push of a button
With the radio remote control SRC, you can directly switch off the vacuum generator on the operator handle when not in use and then back on again. The radio remote control is activated by a simple button push and needs no energy source due to an integrated solar cell.
Swivel workpieces by 90°
With the push of a button, the pneumatic swivelling unit PSE allows the user to swivel workpieces weighing up to 120 kg securely and in an ergonomic fashion.
Continuously rotate workpieces
With the rotation unit DE, gripped workpieces weighing up to 200 kg can be continuously rotated and positioned precisely.
Maximize stack heights
High stacking heights are no problem with the movable operator handle (only for Jumbo Ergo). An optional locking mechanism allows it to be fixed at different angles.
Instantly release workpieces
The venting unit BEL allows non-porous workpieces to be released from the vacuum gripper and set down.
Reduce Sound Level
The silencer box SBB reduces the sound level of the vacuum generator and protects it from outside dirt. It can be easily mounted on the optional blower mounting platform.
Protection Against Dirt
The dust filter STF keeps dirt particles away from the vacuum generator and is always recommended to protect the generator. An optional differential pressure monitor with a signal lamp indicates when the dirty filter has to be changed.
Reach into deep containers
The hose-cylinder extension SZV enables ergonomic loading and unloading of containers such as lattice boxes.
Protection against thermal overload
With the motor-protection switch MSS the vacuum generator can be switched on/off and protected against overcurrent. It can be integrated into the Schmalz crane column without the need for complicated wiring and can be optionally locked.