Filters and Connections

Filters protect the vacuum generator from contamination. Vacuum distributors, hose lines and connections complete the vacuum system and connect suction pads to vacuum generators.

 

Filters and Connections

Vacuum Filters

Highlights

  • Vacuum filter for protection of easily damaged vacuum generators (such as pumps and blowers) by filtering the incoming air
  • For use in dusty surroundings; removal of almost 100% of the dust and dirt
  • Wide range of sizes with various performance figures
  • Replaceable filter cartridges
  • Filter elements with almost 100% removal of dust and dirt
  • Optionally with monitoring of the degree of contamination of the filter cartridge

Benefits

  • The right filter for each vacuum generator
  • Low operating costs, environmentally friendly design
  • Optimum protection of vacuum
Filters and Connections

Vacuum Distributors

Highlights

  • Distribution of vacuum in systems with a central vacuum generator and several suction cups
  • Distribution of compressed air in systems with several distributed vacuum generators
  • Large cross-sections and matched inlets and outlets
  • Two different sizes available
  • Sizes matched to other accessories

Benefits

  • Reduces and optimizes the flow resistance
  • Permits optimisation for fast evacuation times and low flow resistance
  • The ideal solution for a complete installation
Filters and Connections

Vacuum and Pressure Hose

Highlights

  • Hose connections in vacuum systems
  • Polyurethane (PU) hoses for energy distribution systems
  • Vacuum hoses with internal diameters from 2 to 75 mm
  • Wide range of materials

Benefits

  • Wide range of sizes permits optimization for best evacuation time and flow resistance
  • Suitable hoses for all applications
Filters and Connections

Hose Clamps SSB / SSD

Highlights

  • Hose clamp SSB for securing smooth hoses
  • Hose clamp SSD for securing hoses with wire reinforcement
  • Hose clamps with diameters up to 84 mm
  • High clamping forces due to robust clamping screw

Benefits

  • Fitting for all vacuum hoses in our product range
  • Secure clamping of all vacuum hoses, including those with wire spirals
Filters and Connections

Screw in Push Fittings

Highlights

  • Screw in push fittings for quick connection of smooth hoses without the need for tools
  • For use as a connecting element in vacuum systems
  • Suitable for hoses with external tolerances in accordance with CETOP RP 54 P
  • Screw in push fittings with integrated clamping clip
  • Hoses clamped on the outside
  • Absolutely vacuum-tight, shaped for optimum flow
  • Body and clamping clip made of nickel-plated brass
  • Various versions available

Benefits

  • Quick and safe connection and disconnection of all smooth hoses without the need for tools
  • No pinching of the hose: full cross-section remains open
  • Specially designed for vacuum applications
  • Suitable for very rough use; long lifetime; re-usable
  • The right connection for every application
Filters and Connections

Accessories for Screw Unions

Highlights

  • Accessories for screw-in unions are used wherever it is necessary to seal threaded holes, to convert to a smaller or larger thread or to extend the unions
  • Wide range of accessories
  • All accessories made of brass with nickel-plated surface

Benefits

  • All accessories from a single source
  • Long lifetime, reusable, mechanically strong and with a good-looking finish